Bottle Wings - New Product

[kevin_t]

Once again, more photos coming soon, but you can see a prototype in the Multi-Lid post Luke did.

Bottle Wings attach to a lower compression strap and the frame and are a separate from the pack bag bottle pocket. Bottle Wings have more adjustability and cand be used either wrapping behind the frame as a pair, or attached singularly from the frame to the hipbelt. They are sold in sets, since they are a right and left. 4 ounces for the pair and made of 500D Cordura. The primary benefits of this are
- On an Evolution, you can now use a dry bag, and have bottle pockets. You can also have bottle access with just a talon, or a talon an a multi-lid. Essentially, these make it far more usable in these configurations.
- Bottle pocket access. If you want good bottle pocket access you can use it from the frame to the hipbelt on any suspension / packbag of ours
- It separates the bottle from the packbag, so there is no conflicting duty so to speak.

Ask away
Kevin

[swisski]

this is awesome! this solves one of my problems I was trying to figure out a solution for. I will certainly be ordering a pair of these.

[Camber]

When you say good access...can you more easily access the water bottles with the pack on?

[kevin_t]

It depends. It is a stretchy / forward facing cord and lock. That part is easier. The pocket is also dimensional, since compressing flat is less of a concern. If you face it forward and connect to pals on the belt it is certainly easier. If it is wrapped around a frame that does not have much gear, then no it is not.

[kevin_t]

[Camber]

Thank you for the additional info Kevin!

[swisski]

are these shipping now?

[kevin_t]

Probably a week or two
On an Evo example


Sent from my iPhone using Tapatalk

[swisski]

This is awesome. So you can simply thread through the lower compression strap for the top connection, and then the bottom somehow attaches to the frame?

[kevin_t]

Yes


Sent from my iPhone using Tapatalk