Forums

Is there a video of how the bag attaches to the the evolution frame?
Thanks....

If there is, it is old, or possibly on the paradox site. We can shoot a new one, but it is pretty easy. It depends a little on frame height, but here is the process.

- There is a small pice of webbing on the lower encasement / outside . Bags have a ladder lock on the bottom , connect these and tension to a decent tension.

- On the bag, there are 2 pieces of 12 inch webbing per side. One of these should mate up with a 3/4 tri glide on the outside edge of the upper encasement near the top.

After you select which piece of webbing to thread through , based on preference for bag height, you have two choices
- Thread the webbing though the tri glide as tight as you can
- Or .. use the 3/4 tri glide as a guide and take a 3/4 buckle and connect webbing around frame.

I prefer the second option myself as it is super easy to tile bag from frame and is a tighter fit. The second option should be how we send them out

Kevin, I have a 26" kifaru duplex frame. I was looking at the evo 4800 package you have on close out ..do you think it will fit the duplex frame?

Not sure best advice would be to call Luke at our shop. He has an older duplex among his stable of packs and can double check.


Sent from my iPhone using Tapatalk

I will thanks.