by kevin_t » Thu Jan 14, 2016 1:24 pm
If there is, it is old, or possibly on the paradox site. We can shoot a new one, but it is pretty easy. It depends a little on frame height, but here is the process.
- There is a small pice of webbing on the lower encasement / outside . Bags have a ladder lock on the bottom , connect these and tension to a decent tension.
- On the bag, there are 2 pieces of 12 inch webbing per side. One of these should mate up with a 3/4 tri glide on the outside edge of the upper encasement near the top.
After you select which piece of webbing to thread through , based on preference for bag height, you have two choices
- Thread the webbing though the tri glide as tight as you can
- Or .. use the 3/4 tri glide as a guide and take a 3/4 buckle and connect webbing around frame.
I prefer the second option myself as it is super easy to tile bag from frame and is a tighter fit. The second option should be how we send them out